PRODUCTS
ABOUT
HOME
PROJECTS
Floover Loose Lay Antiskid consists of 4 layers : transparent PVC, 100% PVC and fiberglass and a special antiskid underlayment.
Floover Loose Lay Antiskid consists of 4 layers. The top layer is a resistant transparent PVC. This adapts perfectly to the elasticity of the vinyl below creating a nice walking surface. The third layer is made with 100% PVC and fiberglass that gives a great comfort and stability. Finally it has a special antiskid underlayment that increases also the stability of the system.
Method 1 (For residential and light traffic) :
The installation of vinyl flooring (loose lay) is simple and easy. Always make sure the subfloor surface is clean, completely dry, flat and free of cracks. Dirt on the surface will affect the performance of adhesive and may telegraph to the surface once installed. The level of humidity must comply with the values prescribed in current norms: as a general rule, a maximum of 2.5-3% for cementitious substrates and 0.5% for gypsum or anhydrite-based substrates. The vinyl tiles are then laid on the even subfloor plank by plank.
Method 2 (For commercial and heavy/severe traffic) :
Spread adhesive on subfloor before laying the vinyl tiles. Using a non-permanent glue allows you to replace easily a single plank and easy access to the subfloor or raised floor.
122mm x 610mm x 5mm, wear layer 0.5mm
